2'' 360mm Ergo Ratchet Buckle

2'' 360mm Ergo ratchet buckle is an ergonomic mechanical tensioning device. Adopting a 360‑mm extended handle and gear‑pawl mechanism, it applies and sustains tension for 2‑inch lashing webbing. The long‑handle design brings obvious leverage advantage for effortless incremental tightening during cargo securement.

• Primary Applications
  Truck & Trailer Medium‑Heavy Cargo Securement
  Ideal for fastening goods on trucks and utility trailers. Thanks to labor‑saving long‑handle design, operators can easily tension 2‑inch webbing for medium‑heavy cargo during highway haulage.
• Logistics, Freight Yard & On‑Site Fastening Work: Applied in freight yards and logistics depots for tensioning standard 2‑inch lashing webbing.
  
  
• How to Use a Ratchet Buckle (Industrial/Tie-Down)
  Thread the Strap: Ensure the buckle is in the closed position with the cylinder slot facing outward. Feed the strap through the slot from the bottom.
  Remove Slack: Pull the strap through the reel until it is snug against the load.
  Tension: Crank the handle back and forth. The internal gears will catch the strap and tighten it incrementally.
  Lock: Once tight, push the handle down into the fully closed position to lock the tension.
  Release: To undo, pull the spring-loaded release lever on the handle and rotate the handle 180 degrees until it clicks open, then pull the webbing out