50mm 5T 230mm Ratchet Buckle

About this item:

Yellow Zinc Plated Extended Handle Ratchet Tensioner, 230mm Long Industrial Buckle for 50mm Cargo Webbing Secure Lashing

Advantages:

Extended 230mm lever design offers enhanced leverage for effortless tensioning
Thickened yellow zinc plated steel, compatible with 50mm webbing, working load up to 5 ton

Deatiled Specification:

Product Name	Plastic Handle Ratchet Buckle
Width	2'' (50mm)
Breaking Strength	5000kg / 11,000lbs
Ratchet Length	230mm

imagetools0(45f6289865).jpg

空白条.png

This 50mm 5T 230mm ratchet buckle features an extended 230mm operating lever and yellow zinc anti-corrosion coating. The long handle provides greater mechanical advantage to tighten webbing with less effort. Built for heavy-duty industrial use, it reliably stabilizes bulky cargo during long-distance transportation.
空白条.png

How to Use a Ratchet Buckle (Industrial/Tie-Down)
Thread the Strap: Ensure the buckle is in the closed position with the cylinder slot facing outward. Feed the strap through the slot from the bottom.
Remove Slack: Pull the strap through the reel until it is snug against the load.
Tension: Crank the handle back and forth. The internal gears will catch the strap and tighten it incrementally.
Lock: Once tight, push the handle down into the fully closed position to lock the tension.
Release: To undo, pull the spring-loaded release lever on the handle and rotate the handle 180 degrees until it clicks open, then pull the webbing out.