50mmX5T Ratchet Straps

About this item:

Heavy Duty Cargo Control 50mm WLL 2,500kg White Zinc Plated, Tie Down Straps for Truck & Trailer

Application Fields

Cargo securing for flatbed trucks, trailers, pickup trucks and container transport
Fastening pallet goods, machinery, construction equipment, furniture and building supplies
Widely used in logistics transportation, moving services, construction, agriculture and outdoor haul‑down jobs

Detailed Specification:

Product Name	Ratchet Strap with Double J Hook
Length	5m or Customized
Width	2'' / 50mm
Webbing Color	Blue
Webbing Material	Polyester
End fitting	Double J Hook / Wire Hook
Finished	White Zinc Plated
Breaking Strength	5,000kg
Brand Name	Botuan
Place of Origin	Zhejiang,China

空白条.png

Step-by-Step Usage Guide (Four-Step Cycle)

Step 1: Preparation & Inspection
·Select a strap with a Working Load Limit (WLL) exceeding the weight of your cargo.
·Inspect thoroughly: Check webbing for cuts, burns, or excessive wear; ensure the ratchet operates smoothly without rust or damage; verify hooks are not deformed or cracked.
空白条.png

Step 2: Positioning & Hooking
·Route the strap over (or through) the cargo, ensuring the webbing lies flat without twists or knots.
·Attach the hook from the ratchet end (the active end) to a secure anchor point on one side of the vehicle or trailer.
·Pull the free end of the webbing across the load and attach the opposite hook to a corresponding anchor point on the other side.
空白条.png

Step 3: Tensioning & Locking
·Feed the slack webbing through the ratchet spool, ensuring it remains flat and aligned.
·Operate the handle repeatedly (using a pumping motion). The ratchet will progressively tighten the webbing with each stroke.
·Continue tensioning until the load is firmly secured and cannot move, but avoid over-tightening to prevent cargo damage or strap overstress.
·Once tight, allow the handle to return to its natural downward position; the pawl will automatically engage and lock the strap.
空白条.png

Step 4: Release & Storage
·NEVER release the tension by forcibly opening the ratchet. To safely release: Fully lift the release lever or trigger (usually located at the handle base) to disengage the pawl from the ratchet wheel.
·While holding the release lever, gently pull the loose end of the webbing to rotate the spool backwards, slowly relieving all tension.
·Once all tension is released, you can fully remove the webbing from the spool and unhook both ends.
·Finally, neatly rewind the webbing back into the ratchet housing. This prevents tangling and damage, ensuring the strap is ready for its next use.

Key Features

Made of high‑tenacity polyester webbing, featuring great tensile strength, abrasion‑resistant, anti‑stretch and long‑lasting durability for repeated use.
Universal‑fit double J‑hook connects easily with E‑track rings, recessed D‑rings, welded D‑rings, chain anchors and most standard cargo anchor points.
Firm hook‑and‑anchor engagement locks loads securely, stopping cargo from sliding, shifting or falling off during transportation.
Ideal for heavy‑duty cargo securing on trucks, trailers and flatbeds, well‑suited for logistics, hauling and commercial transport tasks.